Roller Doors

Series A

Airport Doors Series A Roller Doors provide high security and are suitable for residential purposes such as; garages, carports, and lane ways as well as light commercial purposes such as; countertops and mini storage warehouses.

 Smooth operation
 Low maintenance
 Extra rigid curtain profile

Door Dimensions

Maximum Height: 3000mm
Maximum Width: 3740mm

Roller Doors Series A

Opening width must be a minimum of 60mm less door width.


The Roller Door curtain is formed by a continuous, roll-formed, deep profile steel sheet, lock seamed together. The 0.425mm thick steel sheet is fitted with a nylon felt strip which runs down either side of the curtain for smooth operation. Tapered bottom rails can be manufactured upon request to suit the opening (limitations may apply).

Roller Doors are available in a variety pre-painted steel colours. See the colour chart or consult your sales representative for colour options and samples.

Bottom Rail
The bottom rail is manufactured from an extruded aluminium section with a minimum depth of 40mm and fitted with a PVC weather seal.

Door Guides
Door guides shall be specially roll formed, galvanised steel channel section with a thickness of 1.2mm and a width of 30mm.

A centre lift-lock keyed on the external face and latched on the internal face shall be fitted to the door at waist height. In a counter top application the locking facility shall be fitted to the bottom of the curtain for easy operation. When specified Series A Roller Doors can be provided with shootbolt locks (internally or externally as specified) that accept 2 padlocks fitted into the bottom rail. Padlocks not supplied by Airport Doors. Shootbolt locks are not recommended for doors that are motorised. Special locks can be provided when specified.

Centre Mullions (Optional)
Centre mullions can be removable or fixed and are often used for wide openings/multiple door installations (as specified). The removable centre door mullion is 125mm width and shall be manufactured from mill finish aluminium and have provision for an optional steel colour infill to match the door colour. Removable centre mullions are not recommended for large Roller Doors and where subjected to high wind loading. Fixed centre mullions are a steel jamb of 150mm width and 50mm depth.

Series A Roller Doors operate by means of a flexible curtain guided in steel tracks and revolving on a roller drum. When specified a steel hook rod can be supplied for control of high hand operated Roller Doors. See Method of Operation.

See Roller Door Operators.


Download Roller Door Brochure (.pdf format, get Adobe Acrobat Reader)

Series A Roller Door (.pdf format, get Adobe Acrobat Reader)